ServicesWindow Retrofitting
Window Retrofitting in Costa Mesa
We set new, energy-efficient windows into your existing frames, so the stucco around them stays put. You get quieter rooms, sliders that glide and lower cooling bills, with no patching or painting outside your home. Afterward, we check back to make sure everything works as it should.

What retrofitting is and when it makes sense
A retrofit window is built to fit inside the frame you already have. We remove the old sashes and glass, clean up the existing aluminum or wood frame, and set a new vinyl window into the opening. A flush fin on the new unit laps over the old frame and rests against the stucco, so the wall itself is never cut.
It is the right call when your current frames are solid and square. That is often true of original aluminum sliders in homes built from the 1950s through the 1970s. If a frame is rotted, badly out of square or letting water into the wall, full-frame window replacement is the better fix. We will tell you that at the estimate.
We hold a CSLB C-17 license, carry bonding and insurance, and have 12 years in business fitting retrofit windows in Costa Mesa and nearby towns such as Santa Ana, Fountain Valley and Huntington Beach.
What a retrofit job includes
Measuring every opening
We measure each window in several spots for width and height, because older frames are rarely perfectly square. Your new windows are ordered to those numbers, not to a standard size.
Removing old sashes and glass
We take out the old panels, tracks and loose hardware, then scrape and clean the existing frame so the new window sits flat.
Setting and shimming each unit
Each window is set level and plumb, shimmed where the old frame dips and fastened through the frame. We slide and lock every sash before moving to the next opening.
Sealing inside and out
Exterior-grade sealant goes where the new fin meets the stucco. Inside, the gap is filled and finished with trim or caulk so drafts and dust stay out.
Haul-away and cleanup
We cover floors and furniture near each opening, take the old windows with us and vacuum before we leave.
Care walkthrough and check-back
Before we go, we show you how to clean the tracks and weep holes and how to work the locks. A few weeks later we check back to ask how the windows are doing and adjust anything that needs it.
Signs your windows are ready for a retrofit
Sliders that fight you
Worn rollers and bent aluminum tracks make older windows stick, jump the track or refuse to lock.
Single-pane glass
One layer of glass lets afternoon heat pour into west-facing rooms and lets street noise straight through.
Sweating frames and mildew
Aluminum frames collect condensation on cool mornings. Over time that moisture leaves black spots on the sills and stains on the drywall below.
Drafts and whistling
Dried-out seals let in air and fine dust on windy days. You may feel it near the sill or see grit collecting in the tracks.
Fading floors and fabrics
Older clear glass does little to block UV. Low-E glass filters much more of it, which helps protect rugs, wood floors and furniture.
How your retrofit goes, start to finish
- 1
Free in-home estimate
We come out, look at each frame, measure and talk through styles and glass options. You get a written, line-item quote with no sales pressure or obligation.
- 2
Ordering and permits
Retrofit windows are made to order, and lead time depends on the manufacturer. Where the city requires a permit, we pull it and schedule the inspection.
- 3
Installation day
Many homes are finished in a single day, depending on how many windows are in the order. We work one opening at a time and keep the new unit staged beside it before the old one is pulled. That way each room is open to the outside for minutes, not hours.
- 4
Final walkthrough
We open, close and lock every window with you, peel off the labels and explain how to care for the frames and glass.
- 5
Checking back
Once the sealant has cured and you have lived with the windows for a while, we reach out to see how they are working. If a sash needs adjusting, we come back and take care of it.
What moves the cost of a retrofit
Retrofitting usually costs less than full-frame replacement because there is no stucco to cut, patch or paint. Your quote depends on what we find at your home, and every line is in writing before anything is scheduled. If you already have a quote from someone else, keep it handy at the estimate so we can compare the details side by side.
- Number and size of windows
- Larger openings and picture windows need bigger, heavier units. A bigger order spreads setup time across more windows.
- Window style
- Sliders are the simplest to build and set. Single-hung, casement and fixed windows each price differently, and specialty shapes cost more.
- Glass package
- Dual-pane low-E glass is the starting point. Tempered glass, which code requires near doors, tubs and low to the floor, and laminated glass for sound both add to the price.
- Frame condition
- An old frame that needs extra shimming, or a section that turns out to need full-frame work, changes the scope. We point this out at the estimate, not halfway through the job.
- Second-story access
- Upper-floor windows can take more time and sometimes extra equipment to reach safely.
Window retrofitting questions
Something not covered here? (714) 709-2237
Will retrofit windows make my glass area smaller?
Slightly. The new frame sits inside the old one, so the visible glass shrinks by a small amount. Most people stop noticing within a few days. At the estimate we can show you where the new frame edge will land so there are no surprises.
Do I need a permit for retrofit windows in Costa Mesa?
Window replacement in California has to meet the state energy code, and many cities ask for a permit on this kind of work. We look into the rules for your address, take care of the paperwork if a permit applies and set up the inspection. You never need to stand in line at city hall.
Is retrofitting as good as full-frame replacement?
When the existing frame is sound, yes. The new window performs the same either way; the difference is how it attaches to your home. If your frames show rot or signs of water getting into the wall, we will recommend full-frame window replacement and explain why.
How do I take care of my new windows?
Vacuum the tracks every few months and keep the weep holes at the bottom of each frame clear so rainwater can drain. Clean the glass with mild soap and water and skip abrasive pads, which can scratch low-E coatings. We cover this at the walkthrough and again when we check back.
How much of the work happens inside my home?
Some of it, since sashes come out and trim goes in from the inside. We lay drop cloths, move furniture away from the openings with your okay and clean up before we leave each day.

Find out if your frames are ready for a retrofit
We will look at each window, tell you honestly whether retrofitting fits your home and leave you a clear written quote. After the work is done, we stay in touch to make sure your windows keep working well.