Skip to content

Free quote, plus care tips for your new windows

(714) 709-2237
(714) 709-2237

ServicesSliding Door Replacement

Sliding Door Replacement in Costa Mesa

If your sliding door drags, sticks or lets in drafts, we'll replace it with a new unit that rolls easily, locks tight and seals out wind and noise. We remove the old door, install the new one cleanly, then check back after the job to make sure it's still working the way it should.

Installer in gloves lifting an old sliding glass door panel beside an open door frame looking onto a backyard lawn, with a ladder, tool bag and aluminum frame pieces nearby

When a new sliding door is the right call

Few things in your home see as much daily use as the slider out to the yard or patio. Years of that traffic flatten the rollers, bend or corrode the track, and dry out the weatherstripping until a breeze slips in around the frame. Older aluminum sliders with single-pane glass also pass a lot of summer heat right into the room.

Replacement makes sense when the trouble is in the frame, the glass or the track itself. We look at the whole door, tell you honestly whether it needs replacing, and give you a clear quote. We've spent 12 years in business fitting windows and doors in homes around Costa Mesa, so we've seen most of the ways a slider can wear out.

What we care about most is what happens after the install. Once your new door is in, we show you how to keep the track clean and the rollers smooth, and we check back with you later to make sure it still glides and locks the way it did on day one.

What your sliding door replacement includes

Old door out, mess handled

We lift out the existing panels, then cut the old frame free while guarding the stucco, floors and trim around it. We load the old door onto our truck and dispose of it for you.

Dual-pane tempered glass

Every replacement slider uses tempered safety glass, as code requires for doors. Dual-pane, low-E options cut heat gain and outside noise. Our Energy Efficient Windows page explains the glass choices in more detail.

A frame sized to your opening

We measure the existing opening precisely so the new frame sits square and level. Vinyl and aluminum frames are both available, and we'll explain how each one holds up over time.

Flashing and sill sealing

The sill is where sliders most often leak. We set the new frame with proper flashing and sealant so rain drains out instead of running under the door.

New rollers, track and lock

Fresh hardware comes with the door. We adjust the panel before we leave so it rolls with one hand and latches firmly.

Care walkthrough and follow-up

Before we go, we show you how to clean the track and keep the weep holes clear. Then we check back after the job to see how the door is doing.

Signs your sliding door needs replacing

  • It drags or jumps the track

    Worn rollers and a bent or pitted track make the panel grind, stick or pop out. Once the track itself is damaged, the door rarely stays smooth for long.

  • Drafts or whistling

    If you can feel air or hear wind around the frame, the seals and weatherstripping have shrunk or failed.

  • Fog between the panes

    Moisture trapped between the two layers of glass means the seal has failed. It can't be wiped away, and the insulating value is gone.

  • Water at the sill after rain

    Puddles inside or stained flooring near the door point to a failed sill or flashing. Leaving it can lead to rot in the framing underneath.

  • The latch won't line up

    If you have to lift or shove the panel to lock it, the frame may be out of square. That's a security problem as well as a daily annoyance.

How the job runs, start to finish

  1. 1

    Free in-home estimate

    We come out, measure the opening, check the frame and track, and talk through glass and frame options. There's no sales pressure or obligation, and you get a written quote that lists what's included.

  2. 2

    Ordering and scheduling

    Sliding doors are built to size, so we order yours after you approve the quote. We schedule install day around you and pull the permit when your city requires one.

  3. 3

    Install day

    We lay down drop cloths, remove the old door and prep the opening. Then we set, level and seal the new frame, hang the panels and adjust the rollers. Your home is closed up and secure before we leave.

  4. 4

    Cleanup and walkthrough

    We sweep up, haul away the old door and show you how the new one operates, locks and should be cared for.

  5. 5

    We check back

    A few weeks later we follow up to ask how the door is rolling and sealing. If something needs a tweak, we'll set a time to come adjust it.

What affects the cost of a new slider

Each sliding door is priced on its own opening and the options you pick, so we measure before we quote. Your written quote lists every item, so the total you approve is the total you pay unless we find hidden damage and talk with you first. We're glad to walk through any line that isn't clear.

Size and number of panels
A standard two-panel door costs less than a wide three- or four-panel unit with more glass and hardware.
Frame material and glass package
Vinyl and aluminum frames differ in price, and low-E coatings, grid patterns or upgraded glass add to the total.
What's under the old frame
Pulling an old slider sometimes uncovers soft or water-stained framing at the sill. If that happens, we stop, take pictures so you can see the damage yourself, and agree on the fix with you before any added work begins.
Changing the opening
Keeping the same size is simplest. Widening the opening means more framing and finish work, and if you want a much wider opening, our Multi-Folding Doors page covers that option.
Permits and finish work
Permit fees, stucco patching and interior trim all factor in when the job calls for them.

Sliding door questions we hear often

Something not covered here? (714) 709-2237

How long does a sliding door replacement take?

Most of the wait is for the door to be built to your measurements. The install itself is usually a single day for a standard slider. We'll give you a realistic timeline when we quote.

Will you have to tear out my stucco?

Often not. A retrofit installation fits the new frame into the existing opening and leaves the stucco intact. When the old frame is damaged, full removal is the better choice, and we'll explain the patching involved before we start.

How do I care for my new sliding door?

Vacuum the track every few weeks and wipe it with a damp cloth. Near the coast, sand and salt air build up faster, so a little more often helps. Use a silicone spray on the track, never oil or grease, and keep the weep holes at the sill clear. We walk you through all of this on install day.

Will a new slider make the room more comfortable?

Usually, yes. Dual-pane low-E glass keeps more summer heat out and holds warmth in on cool nights, and new seals stop drafts. How much you notice depends on the door's size and which way it faces.

What credentials does your company hold for door work?

We're CSLB C-17 licensed, which is California's glazing classification and covers glass doors like sliders. We're also bonded and insured, so your home is protected while we work.

Single-story stucco ranch house with new white-framed windows flanking a dark entry door with glass sidelites, shrubs, lawn, walkway, bucket and tool bag in front

Let's get your slider rolling smoothly again

Tell us what's going on with your door and we'll set up a free in-home estimate with no pressure. After the install, we stay in touch to make sure it keeps working well.